Skip to content
Johan von Konow

Johan von Konow

– my projects

  • Home
  • About
  • Selected Projects
    • LEET modular – a multifunctional Eurorack module
    • SokoDay – addictive sokoban game
    • LEET Synthesizer
      • LEET Synthesizer
      • LEET Keyboard
      • LEET Pad
      • LEET Chord
      • LEET Control8
      • LEET Control
      • LEET Arpeggiator
      • LEET Sequencer
      • LEET Linux
    • 3DPCBoy – handheld gaming platform
    • 3DPCB Wi-Fi Ducky
    • Cardiac – Paper computer from 1968
    • 3DPCB Keyboard
    • Colourful Connected Clock
    • My First Brainfuck computer
    • 3D printed Arduino case
    • Nanino – the DIY friendly Arduino PCB
    • Developing 3DPCB
  • Community
    • Forum
    • Register
      • Lost Password.

Reply To: Printing the 3DPCB

Home › Forums › LEET Synthesizer – Support › Printing the 3DPCB › Reply To: Printing the 3DPCB

2020/12/01 at 22:38 #1796
CWStevens
Participant

0.3mm is roughly 28awg buss wire.  0,0126″ == 0.32mm

I plan on using this: https://www.amazon.com/gp/product/B01BDA7DO6

Chris

Proudly powered by WordPress