2021/05/19 at 15:23 #1910GerritParticipant
WOW, I am blown away by your GENIUS designs !!!
Just read your article in MAKE-magazine (vol.76) about the LEET keyboard
and immediately had to check your site and the other designs.
Finally I see a good reason to buy a 3D-printer… :)
What a great way to use 3D printed materials (without needing a pcb)
YOU ARE A GENIUS !
And thank you for taking the time and making the effort of publishing and sharing everything
and making it all open source !!!
2022/04/19 at 22:48 #2074martinravelParticipant
I agree with Gerrit, your work is full of inventivity, it is really inspiring.
As rhino fan, I have already modify parts of your 3d PCB rhino keyboard and I thank you for all the work you have done. My goal is to make a 40% keyboard style using the 3D PCB principale and the nice design of the button you have made.
I have done my first keyboard prototype using the avalable material I had. I have used usual silicon cable 1.5mm² and find it very usefull. why do you prefer 0.07mm² tinned copper wire ? Have you tried other type of cable ?
I find insulated silicon cable usefull, you can put 2 wire in a unique channel or even cross cables. It is just like a double sided layer copper circuit. You can probably push the idea foreward and having more than two layers by getting as many cable you need into a deep chanel.
I have simplify your diamond channel profile. My printer is not as good as yours, you have done a lot of very fine detail that go way behond my printer capability. It push me to simplify the diamond channel by drawing a square shape of 1.7mm side length with a chamfer at top to avoid overhang print and get a super clean channel. It is working better than expected ! The cable is hold tight thank to the curves in the channel and yet really easy to insert.
I will post my keyboard here when finish.
Once again thank you for your great work, keep it going !
2022/07/01 at 10:47 #2101
- You must be logged in to reply to this topic.